We can do full ultrasonic cleanings and chemical dips on most brass instruments. Some larger instruments can be cleaned in sections, or cleaned and scrubbed by hand if they do not fit entirely in the ultrasonic tank.
Ultrasonic Cleaning
Trumpets, Cornets, Flugelhorns, Mellophones, other high brass - $100
3 Valve Euphoniums/Baritones - $125
4 Valve Euphoniums/Baritones - $180
Full ultrasonic cleaning including piston porting and alignment with felt and water key cork replacements. All valve felts and water key corks will be replaced with Kraus neoprene washers and pads, unless otherwise stated. These synthetic pads last longer and hold up better than traditional felt and cork. This service is routine shop maintenance for brass instruments and is recommended at least once a year.
Solder work - $20 per joint
Dent and Body Work - $40-100+ billed at $80/hour in 15-ish minute increments.
Piston or Casing Work - $40 per valve/casing
Tuning Slide Alignment - $40+ and goes hand in hand with body work (usually).
Pull Stuck Slide - $20+
Other services include: custom bracing, bell modifications, replacement or changing of parts like lead pipes or crooks, and more. Send us a message to get a quote!
Ultrasonic Cleaning
Single Horns - $125
Double Horns - $185
Full ultrasonic cleaning including rotor porting and alignment with bumper and water key cork replacements. Rotor bumper stops can be replaced with Kraus synthetic bumper stops, or with traditional nitrile cord. The synthetic stops are firm, quiet, and have a better feel than nitrile cord in my opinion, but if you prefer the traditional nitrile or silicone cord, then that works for me! This service is routine shop maintenance for brass instruments and is recommended at least once a year.
Solder work - $20 per joint
Dent and Body Work - $40-100+ billed at $80/hour in 15-ish minute increments.
Rotor or Bearing Plate Work - $60+
Tuning Slide Alignment - $40+
Pull Stuck Slide - $20+
Other services include: adding water keys, replacement or changing of parts like lead pipes or crooks, adding adjustable duck foot and/or pinky hook, and more. Send us a message to get a quote!
Ultrasonic Cleaning & Slide Service (includes bell section)
Straight Trombone - $100
Single Rotor or Thayer/Axial - $125
Double Rotor or Thayer/Axial Bass Trombone - $175
Full ultrasonic cleaning and hand slide service including rotor porting and alignment with rotor bumpers and water key cork replacements. Slide service includes removing dents, straightening and truing the hand slide, addressing span and skew, and replacing cork barrel felts to restore proper hand slide functioning. This service is routine shop maintenance for brass instruments and is recommended at least once a year.
Solder work - $20 per joint
Dent and Body Work - $40-100+ billed at $80/hour in 15-ish minute increments.
Rotor or Bearing Plate Work - $60+
Tuning Slide Alignment - $40+ and goes hand in hand with bell section alignment.
Pull Stuck Slide - $20+
Other services include: bracing and balancer customizations, replacement or changing of parts like hand slide crooks or goose necks, and more. Send us a message to get a quote!
Ultrasonic Cleaning
3 Valve Piston - $150
3 Valve Rotor - $180
4 Valve Piston - $195
4 Valve Rotor - $260
5+ Valve any combo piston/rotor - $350
Full ultrasonic cleaning including piston and/or rotor porting and alignment with rotor bumper or valve felt and water key cork replacements. Rotor bumper stops can be replaced with Kraus synthetic bumper stops, or with traditional nitrile cord. The synthetic stops are firm, quiet, and have a better feel than nitrile cord in my opinion, but if you prefer the traditional nitrile or silicone cord, then that works for me! Piston valve felts will be replaced with Kraus neoprene washers. This service is routine shop maintenance for brass instruments and is recommended at least once a year.
Solder work - $20 per joint
Dent and Body Work - $40-100+ billed at $80/hour in 15-ish minute increments.
Rotor or Bearing Plate Work - $60+
Piston or Casing Work - $40 per valve/casing
Tuning Slide Alignment - $40+
Pull Stuck Slide - $20+
Other services include: bracing customizations, replacement or changing of parts like lead pipes, crooks, or neck receivers, and more. Send us a message to get a quote!
More images of repairs and things. Making things slide, straightening some stuff, a lot of cleanings, and some customization work. Yes, that's a cornet with a custom bent bell and custom bracing.